Dublin Trade Fabrication • 5–7 Days Delivery
    EWI & Gable Retrofit
    Manufacture & Fit Nationwide

    Aluminium Verge Trim & Verge Capping, Made to Measure

    Engineered aluminium verge trims, dry verge cappings, and gable trims folded in Dublin from solid 2.0mm (or 1.5mm) architectural aluminium. Designed for external wall insulation (EWI) over-hangs, gable bargeboards, and tiled roof perimeters. Delivered across Ireland in 5–7 business days or fully installed by our expert fitting team.

    Section 1: Clean Gable Lines

    A Clean Gable Edge in Any Colour, Not Segmented Plastic

    The verge of a pitched roof is one of the most weather-exposed elements on any Irish building. Traditionally, roofers pointed gable verges with mortar, which inevitably cracks, falls out, and leaks after several winters. The mass-market replacement has been interlocking plastic dry verge caps—often cheap, chunky, prone to dislodgement during high Atlantic gales, and limited to generic dull plastic colours.

    Our custom-fabricated aluminium verge trim and verge capping systems provide a continuous, high-end architectural solution. Formed from solid 2.0mm architectural aluminium and powder coated in-house to any RAL colour, our continuous gable trims deliver sleek, unbroken shadow lines that elevate the entire roofline of new builds, timber frame homes, and deep energy retrofits.

    Whether you are replacing perished mortar bedding or detailing a modern extension, our made-to-measure dry verge profiles protect roof underlay and battens while ensuring complete gable weathertightness.

    Aluminium verge trim fitted over external wall insulation on a Dublin gable

    Fitted Project — Dublin Gable Verge Detail

    Continuous 2.0mm aluminium verge capping in RAL 7016 Anthracite bridging external wall insulation.

    Section 2: External Wall Insulation Solution

    Verge Trim for EWI: Solving the Gable Insulation Projection

    When external wall insulation (100mm to 150mm EPS plus render) is installed on a gable wall during an SEAI deep energy retrofit, the finished wall line is pushed significantly past the existing roof tile verge. Without an extended flashing trim, water running down the verge of the roof will track directly behind the newly applied EPS boards, causing hidden saturation, debonding, and internal damp.

    Cills.ie manufactures bespoke EWI verge trims tailored specifically for insulation installers and general contractors. We fold an extended horizontal step (e.g. 120mm, 150mm, or 180mm) with an under-tile drip flange and a deep vertical face drop that covers the insulation head and creates a positive 40mm forward drip kick.

    Custom Projection Depths

    CNC folded to match 50mm, 100mm, 120mm, 150mm, or 200mm insulation build-ups exactly.

    Compatible with EWI Cills

    Pairs seamlessly with our EWI window cills for total building envelope protection.

    Key EWI Verge Benefits:

    • Prevents costly roof batten extensions or rafter rebuilding
    • Protects the exposed top edge of the render bead and EPS
    • Forms an airtight, windproof seal along the gable rake
    • Available in single lengths up to 3,000mm
    Aluminium gable and barge capping folded in Dublin workshop

    Gable Barge Capping & Fascia Integration

    Folded with concealed fixings to match adjoining aluminium fascia boards and soffit panels.

    Section 3: Roofline Coordination

    Gable & Barge Cappings That Match Fascia & Soffit

    A common problem on high-end homes and commercial developments is disjointed roofline materials—timber or uPVC bargeboards that fade and peel against modern powder-coated windows and doors.

    Our aluminium barge cappings and gable trims are designed to integrate seamlessly with our aluminium fascia and soffit systems. By fabricating your eaves fascia, gable verge trims, and roof abutment flashings in the same facility, we provide a unified, architecturally cohesive roofline that requires zero maintenance.

    All barge cappings feature pre-engineered overlap splices or internal connecting sleeves that accommodate natural thermal movement in summer while maintaining a tight weather seal during Irish winter storms.

    Specialist Tile Retention Detail

    Roof Tile Edge Channel Flashing: The Tile Slides Directly In

    For roofers and contractors seeking a modern, mortar-free dry verge solution, we manufacture custom continuous roof tile edge channel flashings. The perimeter roof tiles or slates slide directly into a precision-folded aluminium C-channel pocket along the gable verge.

    Integrated Retention Pocket: Folds over the tile perimeter, mechanically locking tiles against Irish gale wind-uplift.
    Zero Mortar or Fragile Clips: Eliminates wet trade bedding, mortar cracking, and dislodged plastic verge units.
    Continuous 2.0mm Aluminium: Folded in Dublin up to 3,000mm in single pieces in any RAL colour.
    Fabricated roof tile edge channel flashing manufactured in Dublin workshop showing integrated pocket where roof tile slides into the verge trim
    Dublin Workshop FabricationContinuous aluminium verge profile with integrated channel pocket where the roof tile edge slides directly in.
    Section 4: Honest Material Comparison

    Aluminium vs Plastic Dry Verge: An Honest Assessment

    We believe in providing straightforward facts so builders and homeowners can make informed architectural choices.

    Feature / CriterionCills.ie 2.0mm Aluminium Verge TrimStandard Plastic Dry Verge Units
    Visual Finish & SightlinesContinuous, straight architectural lines (up to 3m single pieces)Segmented, bulky clip-on caps on every single tile line
    Colour & MatchingIn-house powder coating in over 200 RAL colours to match windows & fasciaLimited to basic moulded plastic colours (black, brown, grey)
    EWI & Wall Insulation OverhangMade to measure to any millimetre depth (e.g. 100mm, 150mm, 200mm)Cannot bridge EWI build-ups; requires rebuilding timber rafters
    Durability & UV LifespanSolid 2.0mm metal will not warp, crack, or become brittle (30+ year lifespan)Thin uPVC plastics degrade under sunlight and high freeze-thaw cycles
    Wind Resistance & SecurityMechanically fixed with continuous backing and concealed fastenersIndividual plastic clips can snap off during severe coastal storms
    Section 5: Engineering Specifications

    Aluminium Verge Trim Technical Specifications

    Precision CNC-folded in our Dublin 10 facility to your exact project measurements.

    Specification ParameterCills.ie Standard SpecificationProject & Installer Advantage
    Material & Gauge2.0mm Architectural Aluminium (1.5mm option available)Rigid solid aluminium ensures straight rakes without ripple distortion or bowing.
    Maximum Single LengthLengths up to 3,000mmClean long runs with minimal joints; internal joint spigots provided for continuous runs.
    Stop Ends & Ridge CapsWelded / TIG stop ends & custom apex ridge capsFactory TIG-welded details for a watertight apex and eaves junction without plastic caps.
    Finish & CoatingIn-house architectural polyester powder coating in any RAL colourFull architectural coating with high UV resistance; matches all RAL window systems.
    Lead Time & Delivery5–7 business days nationwide across IrelandDirect site freight nationwide or express trade desk pickup at Inchicore, Dublin 10.
    Fitting & InstallationMade to measure supply + full fitting service nationwideWe manufacture and fit them on site, taking total responsibility from survey to installation.
    Section 6: Quick Ordering Process

    How to Order Aluminium Verge Trims & Cappings

    Ordering bespoke verge trims for your gable or EWI retrofit project is quick and reliable:

    Method 1 (Fast Mobile)

    Use the Free Cills App

    Open app.cills.ie on your phone. Input your gable rake length, insulation projection depth, and RAL colour to receive instant pricing and place orders directly with our Dublin workshop.

    Open Cills App →
    Method 2 (Email / Quote)

    Email [email protected]

    Send your roof pitch, bargeboard dimensions, or gable sketches to [email protected]. Our engineering desk will confirm all profile folds and return an itemised quotation within hours.

    Email Drawings to [email protected] →
    Section 7: FAQs

    Aluminium Verge Trim Frequently Asked Questions

    Related Building Envelope & Roofline Products: