100% Welded Aluminium • Roof Box Covers, Skylight Kerbs & Ventilation Housings

    Aluminium Roof Boxes & Roof Box Covers

    Eliminate costly flat roof leaks caused by rotting timber kerbs and degraded mastic joints. We fabricate precision made-to-measure 2.0mm architectural aluminium roof box covers, skylight upstands, and ventilation housings in our Dublin workshop.

    10 Business Days Lead Time Welded Seams — Zero Silicone 200+ In-House RAL Colours Unit 20 Inchicore, Dublin 10
    Trade Notice: Cills.ie manufactures architectural building metalwork for flat and low-pitch roofs. We do NOT supply automotive car roof luggage boxes or plastic domestic tile vents.
    Featured Workshop Project

    Custom Aluminium Roof Box Cover (RAL 7035)

    Fabricated in our Inchicore Dublin workshop for a high-specification flat roof commercial and residential build.

    Aluminium roof box cover RAL 7035 fabricated by Cills.ie Dublin
    RAL 7035
    Light Grey Finish
    CILLS.IE DUBLIN FABRICATION
    Product Spotlight • RAL 7035 Light Grey

    Custom aluminium roof box cover / service box — RAL 7035 Light Grey — fabricated in Inchicore, Dublin

    Made-to-measure welded aluminium roof box cover with continuous anti-capillary drip edge, 100mm wide pre-formed base flange for roof membrane dress-up, and weatherproof sealed cap. Powder-coated in durable RAL 7035 Light Grey architectural polyester for long-term resistance against Irish Atlantic rain, frost, and UV degradation.

    Material:2.0mm architectural Aluminium
    Powder Coat:RAL 7035 Light Grey (Matt)
    Welding:Fully TIG-Welded Watertight Seams
    Lead Time:10 Business Days
    Workshop Location:Unit 20, Westlink, Dublin 10
    Category 1: Glazing Kerbs

    Aluminium Rooflight & Skylight Kerb Upstands

    Pre-formed, welded 2.0mm aluminium upstands precision-manufactured for Velux, Skylux, Glazing Vision, and custom architectural rooflights.

    Engineered for Perfect Glazing Integration & Zero Water Ingress

    When installing a flat roof skylight or roof lantern, building regulations and manufacturers specify a minimum kerb height of 150mm above the finished roof build-up (insulation plus waterproof membrane). Traditional site-built timber upstands frequently fail because condensation and rain soak into the wood, causing structural rot and seal failure within 5 to 10 years.

    Our welded aluminium rooflight upstands provide an unyielding, square, and thermally sound kerb. The rooflight frame sits directly onto the top flange, while the roofing contractor dresses the flat roof membrane (EPDM, torch-on felt, or single-ply PVC) up the outer aluminium wall, creating a permanent barrier against standing water and driving rain.

    Standard Heights

    150mm standard, plus custom heights from 100mm to 600mm for warm roof build-ups.

    Corner Welds

    Full penetration TIG welding with zero silicone or open mechanical joints.

    Skylight Brand Compatibility

    Velux Flat Roof WindowsFCM, CFP, CVP, CXP curb-mounted units

    Standard and bespoke kerb heights (150mm to 400mm)

    Skylux RooflightsVitria glass & polycarbonate dome ranges

    Precision-folded upstands with thermal break isolation

    Glazing VisionFlushglaze, Pitchglaze & multipart walk-on units

    Heavy-duty commercial & residential architectural frames

    Roof Penetration HousingsSolar, MVHR, HVAC, cables & soil pipes

    Weathering hoods with insect baffles & cable exit elbows

    Category 2: Service Penetrations & Ductwork

    Aluminium Roof Penetration Boxes & Ventilation Housings

    Custom-welded weathering hoods, service boxes, and ventilation housings for pipes, cables, solar lines, and MVHR ducts traversing flat roofs.

    Aluminium roof ventilation extract box fabricated by Cills.ie Dublin
    Roof Ventilation Box
    Air Extract & Duct Weathering

    Engineered Aluminium Roof Ventilation Extract Terminal

    Fabricated with integrated weatherproof louvred cowls and internal stainless steel insect mesh baffles. Engineered to provide maximum air extract volume with zero wind-driven rain ingress or backdraft on commercial and residential flat roofs.

    2.0mm Welded Aluminium 100mm Membrane Flange 10 Business Days Lead Time

    MVHR & Air Extract Terminals

    Custom-sized extract and intake hoods for Mechanical Ventilation with Heat Recovery (MVHR) and commercial HVAC ductwork. Features integrated bird/insect mesh baffles and internal drip trays.

    Engineered for zero backdraft & storm protection

    Solar & Heat Pump Riser Cowls

    Gooseneck weathering boxes designed to route multiple solar PV DC cables, solar thermal pipes, and air-to-water heat pump refrigerant lines through flat roof decks without rubber boot failure.

    Multiple service bundle capacity

    Soil Vent & Flue Weathering Sleeves

    Fabricated aluminium sleeves and weathered upstand collars for soil vent pipes (SVP) and boiler flues. Replaces brittle plastic tile vents and cracking lead slates.

    30+ year corrosion resistance

    Why Site-Built Timber & Silicone Penetrations Fail

    Common failure points that lead to severe flat roof leaks, stained ceiling plasterboard, and insulation damage:

    Timber upstands rot, expand, and decay from condensation trapped under the skylight seal
    Site-formed timber kerbs are rarely square, leaving air gaps that compromise the airtight seal
    Lead and felt corner dressings split and tear under severe thermal expansion cycles
    Silicone caulking around cable and pipe roof penetrations degrades under UV in 3–5 years
    Insufficient upstand height (under 150mm) allows ponding water to breach the flat roof membrane
    Unprotected plastic tile vents become brittle, crack in winter frost, and allow wind-driven rain ingress
    A factory-welded aluminium roof box cover from Cills.ie creates a permanent mechanical water barrier that outlasts the roof membrane itself.

    Specification & How to Order

    Manufactured to order in Dublin. Follow our clear ordering parameters below:

    Measurement Parameters

    • Length (L) & Width (W): External roof opening dimensions or exact skylight frame outer perimeter.
    • Height (H): Minimum 150mm above finished roof build-up (insulation + membrane fall). Custom heights up to 600mm.
    • Base Flange: 75mm, 100mm, or 150mm outward perimeter flange for membrane dress-up and mechanical fixing.
    • Service Cut-Outs: Specify diameter and position of cable, duct, or pipe entry penetrations.

    Membrane Detailing & Finish

    • Membrane Compatibility: Compatible with torch-on bituminous felt, EPDM rubber, PVC/TPO single-ply, and liquid polyurethane waterproofing.
    • Powder Coat Finish: In-house powder coating in RAL 7035, RAL 7016, RAL 9005, or any architectural RAL classic code.
    • Elevation Colour Matching: Match roof boxes directly with parapet cappings and window sills.
    • Lead Time: 10 business days manufactured in Dublin.
    Smart 3D Measurement & Direct Ordering

    Measured With the Cills App. Fabricated in Dublin.

    No CAD skills or on-site guesswork needed. The Cills 3D app lets you enter your length, width, upstand height, and flange return to generate a live 3D preview and instant fabrication spec sheet.

    Aluminium roof box 3D model measured with Cills App
    Step 1: 3D Visualizer

    Measure & Visualize in Real-Time 3D

    Experience full interactive 3D dimensioning. Input your opening dimensions, flange overhangs, and RAL colour to verify exact clearances before fabrication starts.

    Order aluminium roof box in the Cills App dashboard
    Step 2: Instant Trade Order

    Already Have an Account? Order Here

    Log straight into your Cills dashboard to configure roof boxes, get instant trade pricing, and send dimensions straight to our CNC press brake queue in Dublin.

    Real Jobs. Real Fit. Real Ireland.

    From Our Workshop to Your Site

    Every project below was measured with the Cills app, fabricated in our Dublin workshop, and delivered to site. Not a sketch. Not an assumption. The real thing.

    Roof Boxes & Covers installed on weatherproof roof box cover (RAL 7035) in Inchicore, Dublin 10, Ireland
    Inchicore, Dublin 10
    CILLS.IE

    Custom aluminium roof box cover — RAL 7035 Light Grey — Inchicore, Dublin

    Roof Boxes & Covers installed on flat roof ventilation extract housing in Dublin, Ireland
    Dublin
    CILLS.IE

    Aluminium Roof Ventilation Housing — Dublin Commercial Flat Roof

    All projects measured with the Cills app. All delivered in 10 business days.

    Why Contractors Choose Cills.ie Roof Boxes & Covers

    Precision CNC folding, full seam welding, and single-source Dublin fabrication.

    Welded Four-Sided Box & Cover

    Aluminium kerb and penetration housings welded from architectural-grade sheet. No open corner joints, no site silicone dependency, and zero leak risk.

    Made to Exact Dimensions

    Fabricated to the exact millimetre to match your skylight brand (Velux, Skylux, Glazing Vision) or specific duct and pipe penetration cluster.

    2.0mm architectural Aluminium

    Heavy-duty 1050A/5754 alloy resists Atlantic storm wind loads, coastal salt air corrosion, and heavy site maintenance foot traffic.

    Pre-Formed Drip Edge & Flange

    Integrated 75mm–150mm perimeter membrane flange with continuous 40mm anti-capillary drip overhangs to shed water safely.

    In-House RAL Powder Coating

    Single-source architectural polyester powder coating in 200+ RAL shades, including RAL 7035 Light Grey, RAL 7016 Anthracite, and RAL 9005 Black.

    Fabricated in Inchicore, Dublin

    Manufactured locally in Unit 20 Westlink Industrial Estate with 10 business days delivery nationwide across all 32 counties.

    Trade FAQs

    Frequently Asked Questions About Aluminium Roof Boxes & Covers

    Detailed technical information on roof box covers, rooflight upstands, service penetration housings, and membrane detailing.

    Need a Custom Aluminium Roof Box Cover or Ventilation Housing?

    Use the free CILLS app to measure, visualise, and order custom aluminium products.

    Free to useInstant pricing3 to 5 day delivery