Aluminium window sills specification
Technical and architectural specification guide for external aluminium window sills, sub-cill trays, and parapet cappings manufactured in Dublin by Cills.ie for Irish construction projects.
Use this specification data to prepare architectural drawings, NBS clauses, QS schedules, and site installation details. All cills are fabricated from architectural sheet aluminium with precision CNC press braking and fully welded watertight junctions.
Technical Data & Fabrication Tolerances
| Parameter | Standard Architectural Specification |
|---|---|
| Material Substrate | Architectural Grade Aluminium Sheet: EN AW-1050A . |
| Material Thickness | Standard: 2.0mm. Heavy-duty / Commercial: 3.0mm (available upon structural or acoustic requirement). |
| Profile Configuration | Rear Upstand (typically 20mm–25mm) with optional turn-back; sloping drainage fall (minimum 5°–8° slope); front drip nose (typically 25mm–40mm) with minimum 10mm anti-capillary return fold. |
| Stop-End Details | 100% TIG-welded aluminium end plates and reveal upstands (20mm–100mm height to suit render thickness). Linished smooth prior to coating. |
| Surface Finish & Coating | Architectural Polyester Powder Coating [Architectural Polyester Powder Coating. Film thickness 60–80 microns. Full RAL / BS range available in Matt (30%), Satin (70%), or Gloss (85%). Anodised finishes available upon request. |
| Fabrication Tolerances | Length: ±1.0mm . Angle/Bends: ±0.5° . Profiles CNC folded up to 3,000mm single span lengths. |
| Expansion & Jointing | Internal joint plates (splices) supplied for continuous runs exceeding 3,000mm to allow for thermal expansion (approx. 1mm per metre for a 50°C temperature delta). |
Architect & QS Drawing Call-Out Notes
When drafting window cill schedules or NBS specification clauses for Irish projects, incorporate the following standard wording:
Clause H71 / H74 Architectural Metalwork:
- Manufacturer: Cills.ie (Unit 20, Westlink Industrial Estate, Kylemore Rd, Dublin 10 | Phone: +353 1 223 8774)
- Product Reference: Made-to-measure external aluminium window cill / sub-cill tray
- Material: 2.0mm Aluminium EN AW-1050A
- Fabrication: CNC press-braked with fully TIG-welded watertight stop-ends
- Finish: Architectural Polyester Powder Coating to RAL [Insert RAL Code, e.g. RAL 7016 Anthracite] [Architectural Polyester Powder Coating
- Overhang: 35mm minimum clear of finished wall/render surface with drip return fold
- Accessories: Thermal break insulation pads and concealed internal joint brackets as scheduled
Standard Technical CAD & PDF Datasheets
Drawings and datasheets: contact us with your project details.