Welded Aluminium Pillar Caps

    Pillar Caps ThatOutlast the Pier.

    Made to measure aluminium pillar capping for entrance piers, boundary walls and garden pillars. Fabricated by local aluminium suppliers Dublin based in Inchicore. Welded from a single sheet, fixed from underneath, powder coated in any RAL colour. No silicone. No splits. No staining.

    3 to 5 day lead
    Made in Dublin
    1,000+ contractors
    Tracked nationwide delivery

    CILLS App Preview

    Pillar Cap. RAL 7016. 400 × 400 × 60mm.

    60mm400mm400mm

    Overall Dimensions

    Total Width 400mm × Total Length 400mm

    RAL 7016

    60mm Edge Return

    The Hidden Cost of the Wrong Cap

    Concrete Cracks. Stone Stains.Cheap Caps Fail Within 5 Years.

    The pillar cap is the only thing standing between Irish rain and the inside of your pier. When it fails, the wiring, the brick and the gate hinges go with it.

    Cracked Concrete Pier Caps

    Cast concrete caps absorb water, freeze in winter and split. Once cracked, water runs straight into the pier core.

    Weathered Sandstone & Granite

    Natural stone caps stain, attract moss and chip at the edges. Replacement involves lifting heavy units and fresh mortar.

    Thin Pressed Metal Caps

    0.7mm pressed steel caps dent on impact, rust at every fold and need repainting within five years.

    Silicone Sealed Joints

    Caps assembled from multiple folded pieces rely on silicone at the corners. Silicone fails. Water gets in. The pier rots from the top down.

    Built for Irish Weather. Sized for Your Pier.

    Every pillar cap is welded from one sheet of 2mm architectural aluminium. No silicone joints. No exposed fixings. No compromise.

    Welded Single Piece Cap

    Each pillar cap is welded from one sheet of 2mm aluminium. Four sealed corners. No silicone joints. No water tracks down the pier.

    Made to Your Pier Size

    Enter Width (G), Length (B) and Edge Return (DE). The CILLS app generates a spec sheet sized to your exact pillar.

    Concealed Fixings Only

    Pre-drilled internal brackets sit hidden under the cap. No screws on the visible top face. Clean architectural finish.

    Drip Edge on All Four Sides

    60mm standard edge return throws rainwater clear of the brick or block. Stops streaking, staining and frost damage.

    Any RAL Colour Powder Coated

    RAL 7016 anthracite and RAL 9005 jet black are the most ordered. Match your gates, fascia or window frames.

    Lifetime Aluminium

    Will not rust, rot or split like concrete or sandstone caps. architectural aluminium handles Irish weather for decades.

    Real Jobs. Real Fit. Real Ireland.

    From Our Workshop to Your Site

    Every project below was measured with the Cills app, fabricated in our Dublin workshop, and delivered to site. Not a sketch. Not an assumption. The real thing.

    Aluminium Pillar Capping installed on entrance gates in Castleknock, Dublin, Ireland
    Castleknock, Dublin
    CILLS.IE

    Aluminium Pillar Capping — Castleknock, Dublin

    Aluminium Pillar Capping installed on residential driveway piers in Naas, Kildare, Ireland
    Naas, Kildare
    CILLS.IE

    Aluminium Pillar Capping — Naas, Kildare

    All projects measured with the Cills app. All delivered in 5 to 7 business days.

    Where Pillar Caps Are Used

    From driveway entrances to garden boundaries. Every pier needs a cap that lasts as long as the pier.

    Driveway Entrance Pillars

    Brick or block entrance piers with electric gates, lights or intercoms. Aluminium caps protect the wiring channel inside.

    Boundary Wall Piers

    Pillars between fence panels along the boundary. Match the parapet capping for a consistent finish around the property.

    Garden & Patio Piers

    Decorative piers in landscaped gardens, raised planter corners and pergola supports. Powder coated to suit the scheme.

    How to Measure

    Three Numbers. One Spec Sheet.

    G

    Width (G)

    Measure the top of the pier across in millimetres. Add 20mm for the overhang.

    B

    Length (B)

    Measure the top of the pier in the other direction. Square piers will have G equal to B.

    DE

    Edge Return (DE)

    The downstand on each face. 40mm gives a flush look. 60mm is standard. 80mm hides any pier height variation.

    SpecificationDetail
    Material2mm architectural aluminium
    Standard Width (G)300mm to 700mm
    Standard Length (B)300mm to 700mm
    Edge Return (DE)40mm to 80mm
    Maximum Single Piece1,200mm × 1,200mm
    Coatingarchitectural powder coating polyester powder coat
    Colour RangeFull RAL Classic library
    ConstructionFully welded four sided cap
    FixingConcealed internal brackets
    Lead Time3 to 5 working days
    Production Ready Spec Sheet

    Every Order Comes With a Full Spec Sheet

    The moment you submit your pillar cap order, the CILLS app generates a branded PDF with your job reference, client details, dimensions and RAL colour. The same sheet goes to our Dublin workshop and to your site team.

    • Job reference, client name and delivery address
    • Width (G), Length (B) and Edge Return (DE) per item
    • Primary RAL colour with item count and order ID
    • Isometric preview of every pillar cap on the order
    • Disclaimer protecting both client and fabricator
    CILLS pillar capping spec sheet PDF showing job reference, client name, address, primary RAL colour, isometric preview and dimensions table for an aluminium pier cap order.
    PDF download included

    Custom Powder Coated Window Cills in Any RAL Colour

    Match any facade with RAL-certified powder coating. Our aluminium window cills, flashings, cappings, and trims are made-to-measure and finished in your exact colour.

    Why Colour with Cills.ie?

    • Any RAL colour: hundreds of architectural finishes with UV-stable, durable coating.
    • Perfect matching: on-site measuring devices capture the exact RAL shade for windows and facades.
    • Made-to-measure aluminium: precision fabrication for cills, bay/angled cills, parapet cappings & weatherproof flashings.
    • Retrofit-ready: designed for SEAI external wall insulation systems with clean, watertight detailing.
    • Order in minutes: measure, preview colour, and track manufacturing & delivery inside the app.
    Cills colour selector integration
    Get the CILLS App

    Stop Paying For The Wrong Measurement

    Every day without the CILLS app is another day a guess could cost you a reorder. Capture exact dimensions on site, see a live 3D preview, and eliminate the cost of assumptions.

    Or open the web app at app.cills.ie

    Need Help With Measurements?

    Every phone call without a record is a risk. Talk to our team in Dublin and let us verify your measurements before you order.

    +353 1 223 8774

    Mon to Fri, 9am to 5pm. Free measurement guidance for every order.

    Order Pillar Caps That Match the Build

    Open the CILLS app, enter the dimensions and choose your RAL colour. We weld, coat and dispatch within 3 to 5 working days.

    Free to useInstant pricing3 to 5 day delivery

    Pillar Cap Questions

    Everything contractors and homeowners ask before ordering aluminium pier caps.